Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE Dubai, South Africa, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Malaysia, Indonesia, Thailand, Korea, Japan, etc. Halal & Kosher certified Adipic acid or Hexanedioic acid Manufacturers made in a FDA-GMP plant is offered.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal and DMF support is available.

----------

Contact Adipic acid or Hexanedioic acid SDS, MSDS Sheet of Manufacturers Suppliers Exporters

Please click for Adipic Acid or Hexanedioic acid Safety Data Sheer SDS MSDS Sheet.

Adipic Acid BP Ph Rur Grade manufacturers

Adipic Acid USP NF Grade manufacturers

Adipic Acid FCC Food Grade manufacturers.

Adipic Acid SDS MSDS, Material Safety Data Sheet

SECTION 1. PRODUCT IDENTIFICATION

Product Identity: Adipic Acid or Hexanedioic acid.
CAS Number: 124-04-9
EINECS EC Number: 204-673-3
Molecular Formula: C6H10O4
Molecular Weight: 146.14

SECTION 2. HAZARDS IDENTIFICATION

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

H319: Causes serious eye irritation.

Labeling according to GHS USA & Regulation (EC) No 1272/2008

GHS Label Elements Irritant

Signal Words: Danger

Hazard statements:
H318: Causes serious eye damage.

Precautionary statements:
P262: Do not get in eyes, on skin, or on clothing.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Classification according to European Directive 67/548/EEC as amended:
Hazard symbol(s): Xi Irritant
R-phrase(s): R36 Irritating to eyes.

SECTION 3. COMPOSITION / INFORMATION ON INGREDIENTS

Product Identity: Adipic Acid or Hexanedioic acid.
CAS Number: 124-04-9
EINECS EC Number: 204-673-3

SECTION 4. FIRST AID MEASURES

Always seek medical attention after first aid measures are provided.

Eye Contact: Do not allow victim to rub eye (s). Let the eye (s) water naturally for a few minutes. If particle/dust does not dislodge, flush with lukewarm, gently flowing water for 5 minutes or until particle/dust is removed, while holding eyelid (s) open. If irritation persists, obtain medical attention. DO NOT attempt to manually remove anything stuck to the eye.
Skin Contact: Remove contaminated clothing, shoes and leather goods (e.g. watchbands, belts). Quickly and gently blot or brush away excess chemical. Wash gently and thoroughly with lukewarm gently flowing water and non-abrasive soap for 5 minutes. If irritation persists, repeat flushing. Obtain medical advice. Completely decontaminate clothing, shoes and leather goods before reuse or else discard.
Inhalation: If symptoms are experienced, remove source of contamination or move victim to fresh air. Obtain medical advice.
Ingestion: Never give anything by mouth if victim is rapidly losing consciousness, or is unconscious or convulsing. Have victim rinse mouth thoroughly with water. DO NOT INDUCE VOMITING.

SECTION 5. FIRE FIGHTING MEASURES

Fire and Explosion Hazards: Not considered flammable but may burn at high temperatures. Airborne dusts of this product in an enclosed space and in the presence of an ignition source may constitute an explosion hazard.
Extinguishing Media: Use means of extinction appropriate for the surrounding fire conditions such as water spray, carbon dioxide, dry chemical, or foam.
Fire Fighting: Combustible. Vapours are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapours possible in the event of fire. Apart from oxides of carbon. toxic fumes may result from combustion. As with any fire, fire fighters should be fully trained and wear full protective clothing including an approved, self-contained breathing apparatus which supplies a positive air pressure within a full face piece mask. Use water spray to cool unopened containers.

SECTION 6. ACCIDENTAL RELEASE MEASURES

Procedures for Cleanup: Stop release if possible to do so safely. Contain spill, isolate hazard area, and deny entry. Sweep up or vacuum. Place contaminated material in suitable, labeled containers for final disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.
Personal Precautions: Gloves and coveralls or other protective clothing are recommended for persons responding to an accidental release. Close-fitting safety goggles may be necessary in some circumstances to prevent eye contact. Advice for non-emergency personnel: Avoid inhalation of dusts. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area.
Environmental Precautions: This Contamination of soil and water should be prevented. Keep spillage from entering soil, streams or sewers.

SECTION 7. HANDLING AND STORAGE

Store in cool, dry, well-ventilated area away from incompatible substances. Protect from physical damage. Keep away from sources of ignition. Take measures to prevent the build-up of electrostatic charge. It is good practice to keep  container closed when not in use. Avoid generating dust and the release of dust into the workplace. May form combustible dust concentrations in air. Use care during processing to minimize generation of dust. Good housekeeping is important to prevent accumulations of dust. Do not store together with: Oxidizing agents Keep away from reducing agents.

SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Control parameters: Contains no substances with occupational exposure limit values.
Protective Clothing: The hazard potential is low. Where there is large scale use of this material and significant potential for worker contact, gloves and long sleeved work clothes or disposable coveralls may be necessary. Eye protection should be worn where dust is generated and there is a potential that eye contact may occur. Ensure that eyewash stations and safety showers are close to the workstation location. Do not breathe dust.
Ventilation: Use adequate local or general ventilation where necessary to maintain the concentrations of dust well below the recommended occupational exposure limits for general Particulates, Not Otherwise Specified (PNOS).
Respirators: Where dust or fumes are generated and cannot be controlled to within acceptable levels by engineering means, use appropriate NIOSH-approved respiratory protection equipment (a 42CFR84 Class N, R or P-95 particulate filter cartridge).
Exposure limit(s): Contains no substances with occupational exposure limit values in some countries. Better go by 5 mg/m3 TLV ACGIH.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance: It is a white, odorless granules crystals or powder
Odor: None
Physical State: Solid
pH: 2.5 to 4
Vapor Pressure: Negligible @ 20C
Freezing/Melting Point/Range: 151 °C to 154 °C
Boiling Point: Decomposes at 337C
Specific Gravity: 1.36
Solubility in Water: Soluble in water.
Molecular Formula: C6H10O4
Molecular Weight: 146.14

SECTION 10. STABILITY AND REACTIVITY

Stability and Reactivity: Stable and not considered reactive under normal temperatures and pressures. Hazardous polymerization or runaway reactions will not ordinarily occur.
Incompatibilities: Oxidizing agents. Avoid excessive heat, spark, flame, ignition dust formation and electrical charging. Also avoid strong reducing agents and bases. Violent reactions possible with: Bases, Strong oxidizing agents, Reducing agents. Polymerisation, with Aldehydes, Alcohols.
Hazardous Decomposition Products: High temperature operations will generate carbon oxide and fumes.

SECTION 11. TOXICOLOGICAL INFORMATION

Acute Toxicity:
LD50 Oral - Rat - male and female - 5,560 mg/kg
LC0 Inhalation - Rat - male and female - 4 h - > 7.7 mg/l
LD0 Dermal - Rabbit - male and female - 7,940 mg/kg
Carcinogenicity: IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity: Not Available.
Teratogenicity: Not Available
Mutagenicity: Not Available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.

SECTION 12. ECOLOGICAL INFORMATION

Eco toxicological data:
Toxicity to fish: static test LC0 - Brachydanio rerio (zebrafish) - >= 1,000 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: Immobilization LC50 - Daphnia magna (Water flea) - 46 mg/l - 48 h
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Mobility in soil: No information available.

SECTION 13. DISPOSAL CONSIDERATIONS

Do not wash the material down drain. Put uncontaminated material back into the process if at all possible. Place contaminated material in suitable, labeled containers for disposal. Dispose of waste material consistent with the requirements of waste disposal authorities.

SECTION 14. TRANSPORT INFORMATION

DOT ADR/RID: Not regulated for transport.
IATA: Not regulated for transport.
IMDG: Not regulated for transport.

SECTION 15. REGULATORY INFORMATION

USA Regulations:
SARA 311/312 Hazards: Immediate Health Hazard
SARA 313 Components: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
California Prop. 65 Components: This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

SECTION 16 - ADDITIONAL INFORMATION

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************

Adipic acid or Hexanedioic acid BP USP NF Grade Manufacturers

Aadhunik Industries
Ankleshwar Gujarat &, Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.

e-mail: info@aadhunikindustries.com

 

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Vietnam, Japan, etc.

Copyright and Usual Disclaimer is Applicable